akarembera-up facial tissue production line
| Hung-up kumeso kwenyama otomatiki kupeta muchina technical parameter | |
| AIHWA. | basic parameter |
| 1 | sunungura stand |
| 1.1 | unwind stand uwandu:2 |
| 1.2 | maxi. mbishi bepa dhayamita: ≤1650mm |
| 1.3 | raw paper shaft: shandisa 3-inch shaft + 6-inch shaft sleeve |
| 1.4 | shanduko yepepa raw: manual |
| 1.5 | bepa rinotungamira: manual |
| 1.6 | pepa passby:Passby yepamusoro |
| 1.7 | dhiraivha modhi: mota + bhandi kutyaira (Panguva yakajairika yekutanga uye kumira, iyo mbishi pepa haina kutsvedza uye bepa harina kukuvara) |
| 1.8 | nzira yekurodha mapepa: kurodha necylinder |
| 1.9 | pepa kumucheto kurongedza: Magetsi uye manyorero, maviri-kushandisa aligning system |
| 1.10 | pepa tension control: otomatiki bepa tension control system |
| 2 | kupeta chikwata |
| 2.1 | dhizaini kumhanya: 120metres/min |
| 2.2 | kushanda kumhanya: 100 metres / min |
| 2.3 | kumhanya kuratidza: m/min |
| 2.4 | pepa kugadzika: 3 plys: 50-600 mapepa kana 150-1800 plys |
| 2.5 | pepa pepa kushivirira: ± 1 mapepa |
| 2.6 | pepa kumucheto kurongedza kushivirira: ≤2mm |
| 2.7 | pepa kureba kushivirira: ≤± 2mm |
| 2.8 | kuparadzira bepa: Yakashongedzerwa nebepa rakasvibira rinoparadzira roller (roller yakakomberedzwa rabha roll, kureba kwepakati kunochinjika) |
| 2.9 | pepa rekuparadzanisa system: otomatiki kupatsanurwa kwepepa |
| 3 | Embossing Unit-optional |
| 3.1 | modhi: simbi kune mvere, simbi kune rabha, simbi kune simbi |
| 3.2 | dhiraivha: Yakazvimirira mota dhiraivha (inverter control), mota kune simbi roller nesynchronous bhandi kutapurirana, simbi roller kune simbi roller nekufambisa giya |
| 3.3 | Gear zvinodiwa: Kaviri helical giya (kuoma HRC55) |
| 3.4 | Kuoma kwesimbi roll: Surface HRC60, chromium yakapfava |
| 3.5 | Simbi roll kutsiva: Single roll inogona kupatsanurwa yakazvimirira, nyore kutsiva |
| 3.6 | Steel roller pressure mode: cylinder |
| 4 | dischaging system |
| 4.1 | dhizaini yekumhanyisa: 5logs / min |
| 4.2 | kumhanya kwekushanda: 3 matanda / min |
| 4.3 | kuburitsa: flat belt |
| 4.4 | control mode: variable frequency mota |
| 4.5 | bhandi zvinhu: PVC/PU |
| 5 | otomatiki kupidigura system |
| 5.1 | dhizaini yekumhanyisa: 5 matanda / min |
| 5.2 | kumhanya kwekushanda: 3 matanda / min |
| 5.3 | overturn control: cylinder |
| 5.4 | kutapurirana: flat bhandi |
Nyora meseji yako pano ugotitumira
